I know very little about JD tractors, especially newer ones. Friend wants me to help him replace hydraulic coupling cartridge in the cast iron housing on back of a 7400. How in the heck do you get it out? I took out the snap ring that I could see, but it will not come out. Must be something else holding it but I cannot see what it is. Anyone steering me in the right direction will be greatly appreciated. Thanks.
- Thread starter rmg
- Start date
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
It appears barrels can be removed after snap-ring is removed.
OK, thanks for the reply. After looking at your schematic, it shows that back piece (#2) has bolts in it and will come off the back. I couldn't feel anything back their with my finger. It has 3 sets of remotes and they just stack one on top of the other. It's the top one so if I can't get it out, will remove the whole valve and he can take it to JD and let them do it. Thanks again. By the way, what part of Tx. you from. I live in east Tx. south of Palestine.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy