Hello all! i am researching a steering issue with a John Deere 1010 , it has about 1/2 to 3/4 turn with no effect on front wheels
i found an old post from member Matt Weltz with same question but no response
any help here?
here is old post:
Matt Weltz
07-01-2007 16:45:47
We have a 1965 John Deere 1010 tractor and the steering is starting to get very loose. It is our primary tractor on our hobby farm and I realize as an old tractor the steering is going to be a little loose but within the last couple of years it has really gone down hill. The tie-rods and ball joints were replaced a couple of years ago so they should be good and we just replaced all the front wheel bearings two days ago. What could be the cause or what should I look for? Does the power steering motor need rebuilt? Any help would be appreciated. Thank you!!!
i found an old post from member Matt Weltz with same question but no response
any help here?
here is old post:
Matt Weltz
07-01-2007 16:45:47
We have a 1965 John Deere 1010 tractor and the steering is starting to get very loose. It is our primary tractor on our hobby farm and I realize as an old tractor the steering is going to be a little loose but within the last couple of years it has really gone down hill. The tie-rods and ball joints were replaced a couple of years ago so they should be good and we just replaced all the front wheel bearings two days ago. What could be the cause or what should I look for? Does the power steering motor need rebuilt? Any help would be appreciated. Thank you!!!