So after messing with an thinking a lot about this I have the first one back in. But had to come back in to look at the manual to see how many balls go where and the I-T manual again seems vague.
First off what I did was took a piece of 3/4 inch pipe and made a tool to hold the ball in place and down while I pushed the shift rail back into place.
That is the 1st and 5th , 2nd and 6th rail. The I-T manual shows 5 interlock balls between the rail I have in and the 3rd and 7th and 4th and 8th rail but I do not think I pulled that many out. Also shows towards the rear of the tractor 2 more balls but again I did not have any come out there.
Tech 7 I can still use those pages please.
But at least I am going forward on this thing after much thought as to how to get there
First off what I did was took a piece of 3/4 inch pipe and made a tool to hold the ball in place and down while I pushed the shift rail back into place.
That is the 1st and 5th , 2nd and 6th rail. The I-T manual shows 5 interlock balls between the rail I have in and the 3rd and 7th and 4th and 8th rail but I do not think I pulled that many out. Also shows towards the rear of the tractor 2 more balls but again I did not have any come out there.
Tech 7 I can still use those pages please.
But at least I am going forward on this thing after much thought as to how to get there