I just went through the complete tractor and have engine oil leaking out by the fan end,(installed the pulley and clutch assembly on it) Installed new bearings when I went through in this winter.
The front end does set a little lower, so any oil that gets in tube cant run back. In the parts diagram I don't see a seal or O-ring that seals oil from going down tube. There is a O-ring that seals tube and housing, or am I missing or overlooking something here?
The front end does set a little lower, so any oil that gets in tube cant run back. In the parts diagram I don't see a seal or O-ring that seals oil from going down tube. There is a O-ring that seals tube and housing, or am I missing or overlooking something here?