Finally Done 730 Standard

ejb17

Member
Finally got it to where it should be. 1959 730D w/pony Standard that sat for years. 2600 original hours with original paint and super super nice sheetmetal. Seemed to have been well taken care of but sitting for 5 or 6 years made me nervous but all seems well after going through it. Found some R-3 rears for it that I will be putting on as I do a lot of mowing with a pull type mower.
 
Here it is
a227807.jpg
 
Just like the one my dad bought new in 1959. Non-adjustable front axle and no 3-pt. Standard drawbar. Put many hours on that tractor. Where did your tractor come from (branch office, dealership)? I have serial number registry if you don't know/would like to know.
 
Yes the yellow has been "re-done" but not the green. David, I was told from the previous owner that it came from Mid-West Canada. It is # 7317085 if you don't mind telling me what the registry says.
 
shipped 1/7/1959 from regina sask Canada branch to destination of lafleche sask canada
 
Congratulations. I am envious! I went through the area that tractor came from a couple of times hauling combines. We went across the border north of Scoby Mont and went through Moose Jaw and Regina. lafleche is north of Montana maybe 75? Miles but is a little west of the route we took. Very open country there.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top