FH hc119

Charllie in MO · May 1, 2016

Anyone know what an FH hc119 wheel was made for? Thank you,
Charlie

dan_41jdh · May 1, 2016

Can't answer your question, but Chris Adolphs, a young man who has done research into F&H wheels, might be able to help you. Chris gave a nice workshop regarding Spoked Wheels at the last Gathering of the Green. His handout shows many F&H wheel numbers, but HC119 is not on that list. However, it might be worth a shot to ask him - his email is [email protected].

olddeerefever · May 1, 2016

I was at GOG and attended his wheel info session, his hand out had the wheel numbers for JD tractors so if it's not on his list they must be for another tractor make.

Charllie in MO · May 2, 2016

Thank you all for the help. Charlie

ecclap · May 2, 2016

(quoted from post at 22:44:37 05/01/16) Thank you all for the help. Charlie

Charlie

This is Chris Adolphs. I talked to Gene this afternoon and an HC119 hub is associated with an Allis WC steel wheel. The bolt pattern is slightly different than the Gp axle but usually the holes are worn a bit and the wheel will fit right on. Let me know if you have any other questions.

Charllie in MO · May 2, 2016

Thank you so much, Charlie

Charllie in MO · May 2, 2016

Thank you, Charlie

Charllie in MO · May 2, 2016

Thank you for your help, Charlie

Charllie in MO · May 2, 2016

And thank Gene for me too. Charlie

Mich John · May 3, 2016

I have a single F & H wheel weight (W.NO162) - was that noted on his chart? It's for sale if someone needs ONLY one weight.

FH hc119

Charllie in MO

Member

dan_41jdh

Member

olddeerefever

Member

Charllie in MO

Member

ecclap

Member

Charllie in MO

Member

Charllie in MO

Member

Charllie in MO

Member

Charllie in MO

Member

Mich John

Member

Similar threads