4020 SCV add on

mattroh

Member
I'm looking for any info you guys might have on an add on that could be put on a 4020, side console, to help pull the SCV coupler to the rear of the tractor to release the hydraulic hose.

Dad says they use to have one on a 4430, and it bolted to the two lower bolts of the main SCV housing and had a lever that when moved one direction, would pull back one SCV coupler, and when moved in the other direction, would pull back the other coupler.

Anyone know what he is talking about, what they're called, who made them, and where I could find one?

Thanks,
Matt
 

My 4440 has them, I assumed they were original equipmemt. When I get home Ill see if they have any markings on them. Would be tough to not have them.
 

The lever you refer to that pushed scv barrels out is aftermarket. The same company also made spring loaded dust covers. I remember selling those at JD dealership back in the 70's-80's.
 
Tx Jim is correct they were after market but don't remember the maker. Try Don's Tractor salvage Beattie, Ks. he may have taken some off of
tractors he's brought in. We had that set up on our tractor, works nice.
 
My father-in-law has some NOS from the John Day company which are being sold at auction in two weeks in north central Illinois
 
I believe this is what you are referring to.


34367.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top