Crazy 2 cylinder hydraulic question

coonie minnie

Well-known Member
With the talk of making an unstyled 6 speed tractor, 3 points, etc. I came upon an idea last night.... does a Custom power trol unit, like on a 720, fit the back case of something older, like say a 70? Would the PTO line up? Could one put a 3 point on a 70 or similar by swapping the rear cover with hyd unit and associated parts???

I will go put on my asbestos coveralls now for the roasting I will get.
 
I was thinking about a G, but did not know if the PTO internals would line up. It certainly would not have live PTO.
 
Tell them it was a coperative effort with cat They turned backward. Was a was prototype discovered in unused part of factory basement LOL
 
I saw a 70D at Penfield, IL with a semi-integral plow hooked to it with a 3pt and rockshaft off of a 720 or 730.

Not sure about the PTO however.

Tyler in IL
 
If it was a 70 that had a live PTO to start with it would be the right rotation,,because of the gearing in the rear the rotation was different on a dead shaft.. believe me rotations have been spinning in my head the past week...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top