Hotflashjr
Well-known Member
- Location
- Western MA
I followed the procedures everyone gave out to get the rack and pinion wheels moving on the 1020 I recently bought. I got all 3 large bolts loose, tightened the two small bolts, and whacked the ends of the axle a few times with a large sledge. Nothing. I however was able to keep tightening the two small bolts a turn a piece and have started to move things but not to the point where I can really get the hub moved. The pinion screw also will not budge at all still at this point. The problem I am running in to is that I am running out of room on the head of the small bolt to keep tightening it. Any further advice? I will try and get some picutres.