2155 Hydraulic dipstick

rideev · Jun 29, 2015

Need some assistance. Lost the Hydraulic dipstick to my tractor. It is the straight one, plastic. Went to the dealer and they only have one that you make to the size you need. However, it is $44 and they don't know how long to make it. They said to drain the hydraulics, fill it up with the right amount of fluid and then make the dipstick. Yeah right, what a dipstick he was.

So, does anyone have one that they can measure and let me know where the marks need to be and I will make one myself.

Thanks,

Rich

Tx Jim · Jun 30, 2015

(reply to post at 20:28:56 06/29/15)

Draining & refilling to attain correct level will no work as advertised capacities are when trans/hyd systems were completely dry at the factory and as you know it's difficult to get all the oil out of pumps & lines when changing oil. What's your tractors serial number & trans type?

Here's the spec's for dipstick for a TSS.

Here's another dipstick for below sn<-621999

JD parts doesn't list the spec's for dipstick AL69907 for sn > 691619 -

2155 Hydraulic dipstick

rideev

New User

Tx Jim

Well-known Member

Similar threads