3010 Gas Throttle Linkage

2510Paul

Well-known Member
The linkage shown is the same as the 3010 Gas I am working on. The throttle does not stay at full throttle without holding it, otherwise the lever falls back to about 3/4 throttle. How do I set the linkage tension with the linkage shown?

I have a manual; in a relatively poor picture it indicates a tensioning screw but the "poor picture" does not seem to depict the linkage I have. My linkage does not have that tensioning screw and what appears to be a spring. Can anyone help me? Thanks. Paul
a194451.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top