4020 powershift pto

Nate JD

Member
Pto worked great all last year but after I made my last bale I shut down and let it sit a month before bring it home. When I brought it home pto would not shut off. It turn off fine to kick out last bale then I pulled forward 20 ft and shut down. I can't stop the pto with a board or my foot. I checked the linkage. Is there anything to check with the valve on the side of the transmission before I dig in deeper? Or pressure to check? Thanks
 
(reply to post at 10:30:16 05/19/15)

Be sure this nut that holds arm(parts key 13A or 13B) is snug and no dirt is built up around arm limiting the arm travel.
mvphoto21085.gif
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top