3020jd2955
Member
So have a random question about the hydraulic filter on my 2955. I’ve had this tractor for years and changed the filter easily 4-5 times. After looking at the parts diagram, I just recently noticed that I am missing the retainer (part #4 in the pic) and spring (part #7). I have always just set the filter inside the filter cover and tightened the bolt into place, didn’t even occur to me I was missing any parts.
I haven’t noticed any issues with this in the 2000+ hours I’ve run the tractor, but is the filter not going to fit into place or work properly without that retainer? Should I get the right parts and make sure it’s in correctly, or am I just worrying too much? I don’t want to cause other issues down the road by not having a simple filter in place right. Thanks.
I haven’t noticed any issues with this in the 2000+ hours I’ve run the tractor, but is the filter not going to fit into place or work properly without that retainer? Should I get the right parts and make sure it’s in correctly, or am I just worrying too much? I don’t want to cause other issues down the road by not having a simple filter in place right. Thanks.