Float ride seat rebuild

DanH

Member
Rebuilding my float ride seat on my 620 .should I paint all of the parts first before putting it back together or should I wait
and paint it when it is all back together. I have seen the videos on YouTube by Tyler but I'm not sure how it will come out
I'm sure there are places you won't be able to get painted . If someone has any input how how they did there's or what
worked for them I would appreciate it thanks

Dan
 
Its your tractor and your choice how you want to paint it.
One thing I have done to help preserve the inside of the battery box and help from corroding again is.
Clean it good, apply a rust inhibitor and spray the inside with 'bed liner in a can'.
It has wyrked for me.
 

On my last on (720), I assembled the Springs first..a lot easier to get the cross-bar in that way..

When putting the "sway or swinging arms" on, grind 1/4" off the top, outer corner of both on one side and the whole assembly will go together nicely..

Sure beats wrestling it together the old way..!!

Ron..
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top