pony plug wires

mrbgpetersen · Mar 4, 2015

hi all, the plug wires fit pretty loose in the coils on my pony, has anyone tried a little silicone to help hold them in?

old · Mar 4, 2015

Use a taper punch or some such thing to spread the ends a little bit and they will fit just fine.

buickanddeere · Mar 4, 2015

Depends. There are two coil styles and two spark plug styles. They don't mix.
Do the coils have a pointy post or a spring loaded clip retainer?
Are the plug wires with or without a metal crimped end?

mrbgpetersen · Mar 4, 2015

the coils only have about a 3/4 inch deep hole
which the the wires fit very loosely in. the wires
kind of have a thin bullet type end.

buickanddeere · Mar 5, 2015

Without seeing images I suspect you have the cheaply pointed post coil and the premium plug wires that are supposed to be held into the coil with a spring clip inside the coil.
Mixing new coils and wires has frustrated many unsuspecting fixers .and caused a significant percent of electric start conversions when nothing was actually wrong.

pony plug wires

mrbgpetersen

Member

old

Well-known Member

buickanddeere

Well-known Member

mrbgpetersen

Member

buickanddeere

Well-known Member

Similar threads