Deere 3010 industrial (pics)

redgreen

Member
Well after standing in the snow all day Saturday I managed to bring home another toy. My fiancé named her "Fugly". It is a 3010 gas industrial. Should fit in nicely between my 3010 gas utility and my 3010 diesel utility. I'm 27 and collecting the new gen 20 series and any new gen odd balls like this one. Here are a couple pics of it. Let me know what you guys think, would love to see pics of anyone's 3010 industrials or utilities.
a184212.jpg

a184214.jpg
 
Neat tractor. We have a 3020 utility gas that we use as well as three row crop 3020's. The worst part is finding fenders. I have a set from a 2010 on my tractor and they are the same except for the bottom and how they mount to the axle. A good metal shop might be able to redo them just like the originals. Tom
 
Thanks for the reply. Unfortunately this tractor is missing the fenders and a couple other "cosmetic" items, but has a fresh engine and clutch, also has all new hydraulic hoses.
 
RedGreen,

I have a 500 diesel and a 400 gas, the 500 is a backhoe and the 400 just has the front end loader, but it also has a rockshaft and pto. Its to late tonight, but if your interested ill snap a couple pictures tomorrow and post them.
 
I'd say your fiance hit the nail on the head.
She right on her game plan..
But I might remind her, this machine reminds
yourself of her, Both have promise of being
something pretty special...
 
That makes the 3rd one I've seen and it looks better then the other 2 they usually where worked hard tried to buy the one but went for more then I wanted to pay
 
Yea other then the paint and missing fenders, its in pretty good shape. Engine, clutch, loader valve, all hydraulic hoses, and rear rims are new. Got her bought for $2400 which I didn't think was too bad. Now the hunt is on for the missing tin/fenders!!
 
Would love to see some pictures of your tractors when you get a chance, especially of the rear around the seat. Mine is a "bareback", did they use different tin on these then a utility or industrial with rockshaft? Thanks
 
i have 2010id diesel and a2010 utility gas non runner i plan on salvaging i need the steering motor in front as the id. one has a crack
mvphoto16713.jpg


mvphoto16714.jpg
 
i have attached a couple pics of the 500 and the 400, it was to late by the time i read the request, but ill snap a couple more of it tomorrow

I would like to find a 600 and a 700 someday...

mvphoto16715.jpg


mvphoto16716.jpg
 
Nice machines!! Thank you for taking the time to take the pictures. What size tires are on your 500? Looks like the wheel setup mine has. Thanks again.
 
Redgreen,

i was gonna snap a couple more of the back of the little 400, but it got later and colder than i thought it was gonna get, but ill take some tomorrow. is there anything special you want to see on it?

Top of my head i dont remember what the tire size is on the 500, but the fronts and rims are oversized, but they were on it when i bought it.

I do have a 2010 that i parting out, wide front, ps, 3pt, row crop fenders, good tin. i kept the motor but if it would come in handy for any of you guys drop me a line and let me know, i wont haul anything to scrap, i also have about half of a 300.
 
Redgreen,

really there isnt much tin around the seat and the fenders are just regular mount, nothing real special, but these are what i snapped for ya. If you need any others just let me know

mvphoto16797.jpg


mvphoto16798.jpg


mvphoto16799.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top