I want to thank everybody for their help in figuring out my carburetor problem. What it turned out to be was that the nozzle wasn't going all the way up into the carb stem. It seemed to stick a little and then stop. I put the screw into the stem that I had used to pull it out and pushed it in and out. It was sticky near the top. I kept messing with it knowing it shouldn't stick. Soon it was freeing up a little. Then it pushed in about a quarter inch further. Now it extends up into the carb throat about a quarter inch. I remember now that that is the way it is suppose to be. I put it all back together and it runs fine. Always feels good to solve a problem.