(800) 853-2651
SHOP NOW

7520 hood

Specifically what dimensions do you want? There's a 6030 here, and a friend has a 7520, and I may get by his place tomorrow.
 
I am working on a 4010 I built a bigger frame on it n put a 466
engine in it I need a bigger hood but don't want to go as big as
a 6030, I'm thinking the 7520 hood is a bit narrower than the
6030, I'm going to change all the sheet metal
 
You can put a 466 in a 4010/4020 without stretching the frame,,let me know if you want more info,,but of course you already made a longer frame,,Darn it
 
a 4320 or 45/4620 hood might be a good fit. They are longer and wider but not as large as the 6030/7520. The early 7020 hoods would be the same as 45/4620 as well.
 
Many things need to be changed when you go for longer frame instead of re-working the front pulley and fan set up...steer pipes, pump pipes, and the hood...this is why I came up with the pulley/fan modifications...makes a nice clean conversion..
 
I'm lookin to put this hood on a tractor a pull, the turbo is big enough it will not fit in a milk crate, now I have a bubble built up over it I want to keep the classic look and have enough room under the hood, I'm thinkin the 7520 sheet metal will give me the room I need
 
I see what your thinking,, but the 7520 hood is way bigger, that's for sure,,it will probably fit like a saddle on a sow, the 4320 hood would be a closer fit,,but they are kinda rare..
 
The 7520 will have the big air cleaner door in it too,,,I have a new 4955 hood hanging here in the shop, but that's not the look your going for..
 
I know what you mean.. I got this hood out of a Deere Depot dumpster,,nothing wrong with it,, I was going to put it on an old wheel ditcher, then didn't,, if any one out there is interested in it,,here it is..
a176813.jpg
 
The only difference between a 6030 hood and a 7520 hood is the 6030 has a hole out front for the fuel tank neck. If not for that, they are identical and fit precisely the same. I can get exact dimensions if you still need some.
 
You must log in or register to reply here.

Similar threads

T
44 A decal placement
Replies
2
Views
146
Watthour
Watthour
R
1946 Model A styled - tank fixing
Replies
2
Views
270
Mark-Ia
M
O
630 hood and gas tank removal
Replies
2
Views
417
PJH
P
D
Filter number
Replies
4
Views
254
DCAC
D
S
7520 questions
Replies
14
Views
1K
ss55
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top