greg fosse

New User
I parked a 38b 4years ago that was running perfect. I've been trying to get it started again but have no spark. Any ideas?
 
There are 6 more connections not counting the points before it gets to the plug , that need to be clean/shiny for a mag engine to run good. The contact button on coil / spring contact in cap. Rotor to button in cap , rotor to posts in cap , little "ground spikes" in mag primary plastic housing (Wico C) , plug wire holes in cap , wire-to-plug conn. Clean the plugs , if still same ones from 4 yrs ago , with either brake clean/Q-tip or MAF sensor cleaner/Q-tip. Wouldn't hurt to spray out inside of mag/rotor with MAF sensor cleaner also. Also, plug wires are like tires, they deteriorate with age regardless of use.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top