I have a pony motor with two rods that are broke at the crank. Any suggestions for a supplier for parts or does anyone have some good used rods/parts available? I know deere doesn't make some parts anymore like the rods. Are gaskets available aftermarket or do I have go straight to deere. I don't have the engine completely apart yet to know what all I'll need. I know I want to at least rering the pistons and replace the liner o-rings along with the 2 rods that are broke. The liners are also chipped at the bottom from the broken rods, so they'll probably need replaced too. I'll probably do the heads also if needed. I assume someone left the gas on and it hydrolocked to cause this damage. Any advice on repairing the pony would be appreciated. Thanks in Advance!