JD 6400 PTO

2brenda

New User
This message is a reply to an archived post by JD Seller on June 21, 2010 at 18:51:56.
The original subject was "Re: JD 6400 PTO".

we were baling when the pin came out and the baler stopped and the tractor didn"t. Needless to say the pto came apart and the wires all got messed up. I got the wires all working but the pto won"t engage. I checked fuses, and can"t find anything else wrong any suggestions?
 
There's a solenoid valve on the back of the tractor that engages the PTO.

Did the solenoid coil or the wires to it get mangled?
 

Check the wire connections on this sensor.
mvphoto10097.gif
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top