starting lever for 430

could some one send a pic of the starter lever or pull rod for a model 430. I do not have one and getting tired of pushing the starter button with my foot.
 
There should be a "sort of " l shaped lever mounted to starter, to activate you pull on a small rod hooked to the lever. Check JD on line parts book should be a pretty good picture there.
 

Thanks it looks like a rod attached to a lever. I see the lever is for sale and I could just make the rod. Thanks for the help
 
Take a look at the parts diagram below.

a163222.jpg" width="650"


The Starter Rod (Key 29), Pin (Key 27), and Lever (Key 28) are the "main" parts you will need.

Bought the Pin and Lever from <a href="http://www.external_link.com/">Sharp's Tractor</a> for our Model 40S.

a163223.jpg" width="650"


Hope this helps.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top