homer long
Member
What size are shear bolts and how many different ones are there Thanks in advance
- Thread starter homer long
- Start date
If you are referring to the flywheel shear bolts, they are a special bolt for the job.
The threads are 1/4" and the body is larger.
They are still available from DEERE, for between $1 and $2 each.
Early balers, up thru serial #32867 use part #BP13774.
Serial # 32868 and up use #BP13931.
If you are referring to other shear bolts/pins on the baler (possibly in the knotter drive or needle lift link, for example) you can look them up in the factory parts catalog at the link below.
It"s possible those part number will have been superseded. The ones I posted for the flywheel shear bolts are the current part numbers.
PC0246
The threads are 1/4" and the body is larger.
They are still available from DEERE, for between $1 and $2 each.
Early balers, up thru serial #32867 use part #BP13774.
Serial # 32868 and up use #BP13931.
If you are referring to other shear bolts/pins on the baler (possibly in the knotter drive or needle lift link, for example) you can look them up in the factory parts catalog at the link below.
It"s possible those part number will have been superseded. The ones I posted for the flywheel shear bolts are the current part numbers.
PC0246
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
The 14T I grew up with had the flywheel pin that has been mentioned as well as a pickup shear pin. That one was a small bolt kinda like the flywheel. The auger had a shear pin also that was a groove pin and the needle arm had a shear pin that was a spring roll pin. The one in the auger was hardest to change.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy