700 Loader Control Valve

eovdubd

New User
I"m having problems getting the boom spool to seal where it comes out of the body. I have replaced all 4 seals without any success. Did John Deere make an over-sized seal. When I pulled the spool the machine area on the spool looked fine. I plan on tearing in to it today to see if by chance the seal was rolled, but your thoughts might provide another answer.

Rob
 
Hopefully it's just the O-ring and not the casting. It looks like it's leaking at the bottom of the spool.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top