B101R Pedestal Bushing

I was wondering if anyone has the specs for the OD of a B101R pedestal bushing for a John Deere B? I just bought a 48 B and the bushing is extremely worn, to the point that I can grab one of the front wheels and push them side to side and see the entire front spindle assembly move side to side in the casting. I know that I can have a bushing made, and I know the factory spec ID, but I can"t find a spec for the OD or length.
Thanks,
Wesley
 
Outside D. Is 2 inches and lenght is 2.75 inches on the top of the notch and 2.62 on the bottom of the notch where it engages the thrust washer.
 
I'll see if I can post a picture

<a href="http://s.photobucket.com/user/neven1963/media/A00F2212-AB0A-4876-9AED-4A9EA1BE0892_zpsiinihrcx.jpg.html" target="_blank">
A00F2212-AB0A-4876-9AED-4A9EA1BE0892_zpsiinihrcx.jpg" border="0" alt=" photo A00F2212-AB0A-4876-9AED-4A9EA1BE0892_zpsiinihrcx.jpg"
</a>
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top