David R Inman
Member
Well sadly just replacing AR26375 has not fixed our problems with our 1961 3010 Gas's Hyd system- Breaks don't work, 3 point dose not work right.
For reference to past posts, see link.
So we checked the pressure at the breaks: 1200 instead of 2200. Tried the adjustment on the pump to no response. So Dad decided to tear into it- has wide front end off, gas tank off (despite what the book says he hopes to take the pump out in a way in winch he can use a hoist or forklift).
So,as I said, we've got the book, but we would also like to hear the words of experience form you all on:
1) how to take the pump off?
2) Where to get rebuild kit? Deere? or is there an aftermarket that is as good or better?
3) how to rebuild it?
4) how to put it back in?
Thanks.
Untitled URL Link
For reference to past posts, see link.
So we checked the pressure at the breaks: 1200 instead of 2200. Tried the adjustment on the pump to no response. So Dad decided to tear into it- has wide front end off, gas tank off (despite what the book says he hopes to take the pump out in a way in winch he can use a hoist or forklift).
So,as I said, we've got the book, but we would also like to hear the words of experience form you all on:
1) how to take the pump off?
2) Where to get rebuild kit? Deere? or is there an aftermarket that is as good or better?
3) how to rebuild it?
4) how to put it back in?
Thanks.
Untitled URL Link