Ray Durham
Member
I have a 1945 model A (serial number 554698)and would like to connect with others who might have this same model tractor. Thanks.
- Thread starter Ray Durham
- Start date
Anonymous-0
Well-known Member
I have 1944 A long hood
Walt in Jaxn Tn.
Well-known Member
Post some phtos of your 45"A", close ups and glammour shots, photos of unique things about your tractor, photos of wear over the years/damage, then writs some info about it, noises it makes, is it easy to start ect. The photo is of my 46 "A" Long Hood. The photo was not taken by me, but, the man I bought it from in FtWorth Texas. This photo along with 2 others was sent to me in and email when I asked for photos before I decided to buy the tractor. I could write 10 full pages of info on this tractor since I got involved with it.
--Walt--
--Walt--
M Puller in WI
Member
i just bought '46 A this summer. nothing to look at but it runs prime after sitting for 5 years. i put back tires tires on it. mine for some reason has a water pump and radiator off a late A and has a power block but yet is still hand start. has a power-trol and pressed steel rear rims. heres a picture of it before i brought it home. i know im a farmall guy but i love them old two cylinders for some reason.
M Puller in WI
M Puller in WI
Bob Harvey
Well-known Member
What is the story behind the 'long hood' ?
alabamafrog
Well-known Member
My buddy just bought one a few weeks ago that is around that year, he got a slant dash A and slant dash B and 2 full sets of cultivators with them.
James Howell
Well-known Member
We have a 46A named "Easy".
Old tractor was uglier than my stepmother when we got it.
<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Easy/?action=view¤t=IMG_1306.jpg" target="_blank">
![IMG_1306.jpg" width="500" height="400" border="0" alt="Photobucket](https://i200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Easy/IMG_1306.jpg" width="500" height="400" border="0" alt="Photobucket)
</a>
<a href="http://www.youtube.com/watch?v=telcwMLZaLs">
"Easy"</a> cleaned up pretty good.
Use the tractor and #5 mower to cut our hayfield.
<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/First%20Cutting/?action=view¤t=IMG_1522.jpg" target="_blank">
![IMG_1522.jpg" width="500" height="400" border="0" alt="Photobucket](https://i200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/First%20Cutting/IMG_1522.jpg" width="500" height="400" border="0" alt="Photobucket)
</a>
Old tractor was uglier than my stepmother when we got it.
<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Easy/?action=view¤t=IMG_1306.jpg" target="_blank">
<a href="http://www.youtube.com/watch?v=telcwMLZaLs">
"Easy"</a> cleaned up pretty good.
Use the tractor and #5 mower to cut our hayfield.
<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/First%20Cutting/?action=view¤t=IMG_1522.jpg" target="_blank">
Walt in Jaxn Tn.
Well-known Member
Bob I'll have to get back with you on that cause the story really starts back in 1963 like the start of a Frank Capra Movie. I'll take some time and make some audio notes on my little tape recorder.
--Walt--
--Walt--
johndeerefan
Member
Since there are so many other long hoods here. Thought I would add my 47 Model A to the mix even though it's not a 45.
Thanks for the picture Walt.
Thanks for the picture Walt.
johndeerefan
Member
Thanks a lot. I give the credit to Walt's photography. He took this picture back in July at the Adams, TN threshing show.
NW MO Poppers
Member
My 1946 A is just 5,912 tractors younger than yours (sn 560610). Originally belonged to my grandpa. Sorry for the poor quality pic, it was the only one I could find on short notice...
James Howell
Well-known Member
That's one nice looking tractor!
Good work and thanks for the photo.
Good work and thanks for the photo.
mark schafer
New User
Ray,my name is Mark Schafer I own a 1945 slant dash A serial number 553667 and have had this tractor for 14 years, it has factory round fenders,power trowl,and a baker valve.
okiecntrygal
New User
Hello Ray and any others that could give some advise on a 1945 John Deere Styled Model A> We are in need of the entire fan shaft with assemblies. Can anyone tell me where to look? Thank you!!!!
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy