pix of hyd on 2010

Garrey Pike · Jun 30, 2013

this 1st pix is of port to 3 pt

Jo Bird · Jun 30, 2013

Okay so the return is plumbed to the oil fill. The real question is where is the supply line plumbed in ??? Need a description or picture of the supply location..

Tx Jim · Jun 30, 2013

(quoted from post at 18:48:20 06/30/13) Okay so the return is plumbed to the oil fill. The real question is where is the supply line plumbed in ??? Need a description or picture of the supply location..

There's some photo's down on another 2010 thread that I posted for Garrey but still no clear point of pressure hose attachment.

Jo Bird · Jun 30, 2013

Yes, I jumped over to the modern view and saw them. I'd almost bet they tied into one of the rear remote lines and tied the lever on the dash open. If that's the case then returning the dash control to neutral should allow the system to build pressure when the 3 pt control is moved. Some control valves had power beyond plugs in them but they are rare. We need to know how it gets pressure.

pix of hyd on 2010

Garrey Pike

New User

Jo Bird

Member

Tx Jim

Well-known Member

Jo Bird

Member

Similar threads