3010 Gas Hydraulic problems.

Hi, our one and only JD's hydraulic system has gone kuput. Time/118 degree weather has not yet allowed us to do any real checking, but I thought I post what we know, and see if any one knows whats wrong and what might be involved in fixing.

So, as stated its a 3010 Gas, and its a 1961 model according to the sn. At present, it has no lift/lower in the remote Hydraulic lines, AND the 3point wont go up. It however still has power steering and breaks.

Thx.
 

How long since hyd filer was changed and sump scree cleaned? I suggest to check stand-by pressure. Factory setting is 2250 psi. It's possible pressure control valve under the hood is stuck/plugged stopping hyd oil from going to scv & 3 pt.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top