rincon_rider
New User
Do I have to use a hook style top link on my 4010? Or can I just get one at TSC or fleet farm? If so what size and are bushings needed. Thanks
- Thread starter rincon_rider
- Start date
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
No you don't have to use factory center-link.
rincon_rider
New User
So what size top link will work?
As wolfman says the space in front of the top link pin is small. If you can"t come up with a Deere one, find one with the smallest ball that you can and even then you will more than likely have to grind the front of the ball to have room for it to pivot. Center link pin is 3/4 on tractor end, depends on you for other end. Don"t remember the length.
Tx Jim
Well-known Member
- Location
- Coyote Flats, Texas
Here's the spec's of the center link attaching on tractor end. Spec's aren't available for center link part that attaches to tractor on JDparts.com as part is NLA.
part Number: AR26599
Description: PIN, WITH HANDLE
Specification
Weight 0.68 LBS 0.31 Kg
Pin Diameter 0.750 IN
Length 4.812 IN
Hole Location 4.469 IN
Hole Diameter 0.281 IN
Length 1.625 IN
Length 2.375 IN
Diameter 0.438 IN
part Number: AR26599
Description: PIN, WITH HANDLE
Specification
Weight 0.68 LBS 0.31 Kg
Pin Diameter 0.750 IN
Length 4.812 IN
Hole Location 4.469 IN
Hole Diameter 0.281 IN
Length 1.625 IN
Length 2.375 IN
Diameter 0.438 IN
Dave Sherburne NY
Well-known Member
Like the wolfman said, a regular TSC top link won't work. You can find what you need on Ebay but they're not cheap
larryanderson
Well-known Member
They will work if you get right one.Still best to get original one They usually bring around $150.There are two different pin sizes and you need smaller one for 3010/early4020.
Anonymous-0
Well-known Member
I have a 3010 LP standard Tractor. Its needs tlc work but engine fires up. Someone wants to buy it but not sure of it value. I understand it a rare tractor. Can anyone help with a value.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy