Roll over plow

I was wondering if anyone knew what model plow this is? Bought it today.
Thank you,
Charlie
a112795.jpg
 
No help from me but it looks pretty good. Showing my ignorance but what is the purpose of a rollover vrs a regular 3 point 3 bottom plow?
 
825. Pulled a 3-16 for years behind a 4010D in hard NM soil and that was a full load! Run your plow in that NM caliche, and those bottoms would be shiny in about 30 minutes.
 

Agree that it's an 825 trip bottom. The truss frame gives it away. If it had a tube frame and shear bolts, it'd be an 835. A tube frame and trip bottoms is an 845. I recently sold my 845 3 bottom with coulters for $1500.

Another useless bit o'info - the motor that flips the plow is a 630 power steering motor.
 
That is an 825A series. On that model without the A was no trips. I've got the one without the trips. Been trying to come up with a complete set of origional rolling cutters for it. Its got the mounting hardware, but missing the coulters.
 
I have four coulter's, not all matching but am missing one of the coulter mounting brackets A10936A, any ideas where to look? What is different about the coulters on the 825?
Thank you,
Charlie
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top