Author	[Modern View]
bigboreG 03-17-2013 12:52:54 166.181.3.44 Report to Moderator	First off you need to look at your magneto and see if you have a model x or model c. The X has one large cap, the C has two caps. One large, one small with a wire from one to the other. Your idle passage is probably plugged up, need to clean with small bits and carb cleaner. Was the rebuild a professional job? For the throttle setting, one almost has to use a tachometer or a dyno to correctly check the engine speed at idle and full throttle. I could do it if i was there, but thats not possible. Do you have the owners manual? There is some valuable information in there about throttle settings. I use a handheld multi meter with a built in tachometer to set most of them, pricey to buy but works great. [Reply]   [No Email]
Ray Durham 03-17-2013 16:36:00 68.98.196.60 Report to Moderator	My mag cover is one large cap.....so must be an X model. The carburetor was professionally rebuilt by Burrey. Actually, I don't think the carburetor is the problem.....other than tweaking the high/low idle now that it is back on the tractor. I have a multi-meter.Can you tell me how to use it on my tractor? Thanks   [Reply]  [No Email]