4020 turbo

big shooter · Mar 4, 2013

Here is a picture of the turbo on my 4020. It fits under the hood, the exhaust comes out of the center of the hood. The only thing I don't like is the elbow sticks above the hood a bit.

tim s · Mar 4, 2013

Yes I have seen and done a few like this, it works out fine. Notice how the dual SCV is touching the manifold, and the turbo is still very close to the hood,,I am going to try altering a stock 4020 manifold to tip the blower over away from the hood a bit, and the stock manifold will give the SCV clearance...I will take some pictures as I make it and we will sort out the good and bad with it...

big shooter · Mar 4, 2013

Had to mill the exhaust manifold to clear the SCV,it is VERY thin. Good luck with the 4020 manifold. Will look forward to the pictures.

tim s · Mar 4, 2013

A while back I thought about cutting a wedge out and inverting it, welding it back in place for SCV clearance,but never did it....but the idea had merit..

big shooter · Mar 4, 2013

I'm sure that's what I'll have to do if it blows a hole in that thin spot.A friend of mine spaced the dash and SCV's up, he said way to much work.

4020 turbo

big shooter

Member

tim s

Well-known Member

big shooter

Member

tim s

Well-known Member

big shooter

Member

Similar threads