Author	[Modern View]
spareparts-45 03-03-2013 07:56:41 75.199.174.89 Report to Moderator	Need some they are no longer avaiable from deere does any one have any new old stock or a source to get them? 423-526-8484 [Reply]   [No Email]
charger66 03-04-2013 05:53:23 97.132.210.211 Report to Moderator	Re: JOHN DEERE A /60 .004 UNDER ROD BEARINGS in reply to spareparts-45, 03-03-2013 07:56:41   A set of .004's just went for $20 on eBay for a 520-530. I know Deere has. 002's for late B's still. [Reply]  [No Email]
jdfun 03-04-2013 05:15:32 63.246.104.97 Report to Moderator	Re: JOHN DEERE A /60 .004 UNDER ROD BEARINGS in reply to spareparts-45, 03-03-2013 07:56:41   I have a set of JD NOS .002 under size bearings for sale. I'll take half of what JD is asking. Thanks ,Tom. 573 535 8952 [Reply]  [No Email]
Bob Harvey 03-03-2013 16:47:56 209.121.225.171 Report to Moderator	Re: JOHN DEERE A /60 .004 UNDER ROD BEARINGS in reply to spareparts-45, 03-03-2013 07:56:41   Take the time to 'mic' the journals. If they are even remotely oval, do the .010" regrind. Bearings are easy to get in that size and you won't have ANY problems (unless you screw something up) for another 50+ years. HTH [Reply]  [No Email]
gtx1967jewison 03-03-2013 15:56:08 174.225.134.202 Report to Moderator	Re: JOHN DEERE A /60 .004 UNDER ROD BEARINGS in reply to spareparts-45, 03-03-2013 07:56:41   I've had good luck on ebay. Be patient. Place wanted ads on this site. Why remove &a grind a crank thats only slightly worn? Ask jd if they have the 0.002 unders. Likely they do, & the clearance specs are 2 to 4 thousandths i believe, so they'll most likely work fine. [Reply]  [No Email]
teddy52food 03-03-2013 08:17:34 184.94.175.179 Report to Moderator	Re: JOHN DEERE A /60 .004 UNDER ROD BEARINGS in reply to spareparts-45, 03-03-2013 07:56:41   If the crank is worn that much, it should be ground to .010. May have to go to .020 already. [Reply]  [No Email]