Model for M One Bottom Plow

SuperABen · Feb 25, 2013

I am going to try to mount the single bottom plow that came with my M. I'd like to find a parts breakdown on the Deere parts reference site, so I can verify that everything is there.

What model would it most likely be? It mounts on the rear, with one rolling coulter and one stamped steel tail wheel. The plow says "Syracuse" on the back, and I didn't see a stamped tag anywhere on the frame.

Any tips to mounting it?

Thanks in advance for your help!
Ben W.

JohnDeereM50 · Feb 25, 2013

One bottom plow for a M would be a model M1. It could be a 14" 16" or 18" bottom plow.

This bracket hangs under belly of tractor and depth control bar of plow rests on it.
Tail wheel and jointer was extra, I have both on mine.

SuperABen · Feb 26, 2013

Thanks! That's what I needed to know. It looks like I have an M1A from studying the parts book.

Ben W.

Model for M One Bottom Plow

SuperABen

Member

JohnDeereM50

Member

SuperABen

Member

Similar threads