JD 630 HYDRAULICS

Anonymous-0 · Feb 17, 2013

Tractor only has pressure on the up side no down pressure does anyone know what problem could be thanks

Anonymous-0 · Feb 17, 2013

If you're talking about the 3 pt hitch, ag tractors do not have down pressure.

Paul_IN · Feb 17, 2013

The remote cylinder control valve can be adjusted for single or double action. I do not remember off the top of my head which cap nut you need to take off and either seat or screw out the adjusting screw.

Nathan Kapp · Feb 17, 2013

Correct me if I'm wrong, but I think that is the point of the 3-point return spring. On my 630, it was missing and had to be replaced.

730d se · Feb 18, 2013

There is no down pressure. The piston sits verticle and the oil fills on the bottom of it. It has lift (up pressure) as oil is allowed to flow in. It is simply draining the oil when going down.
Make sure the big spring that is mentioned is on the left side.
If the arms will not go down, it could be the settings on the valves. Get JD SM 2022 for a full explaination on how to set it up.

buickanddeere · Feb 18, 2013

On which hydraulics?

JD 630 HYDRAULICS

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Paul_IN

Member

Nathan Kapp

Member

730d se

Well-known Member

buickanddeere

Well-known Member

Similar threads