2010 liner plate

fullthrotle · Feb 15, 2013

HELP! Looking for a cylinder liner plate and one Std. piston for JD 2010 diesel. Plate JD # AT15762. Piston casting # T19063T.

old · Feb 15, 2013

I check a few years ago at JD and they could still get them but boy oh boy do they want the $$ to get one and it is special order to boot. I think back then it was $500 plus just for the sleeve set

fullthrotle · Feb 15, 2013

Thanks "old." Costs $1235 now. Ouch! Gotta find this one used.

old · Feb 15, 2013

If you needed a block or head or other such things I could help you but I sold the sleeve set years ago out of a 1010 I have here that is just parts. You now know why I always tell people to run do not walk away from the 1010 and 2010 parts are high it you can find them and they are not easy to work on

MSD · Feb 15, 2013

Be careful buying a used one. If they are not taken out properly, the
sleeves will crack where they attach to the deck.

tim s · Feb 15, 2013

1010 and 2010"s should all have a "Do not resuscitate" sign hanging on them...

Ray · Feb 15, 2013

I've got a short block off a 1010 diesel.It was a complete running engine,but i used the head for another tractor.I'll take 500 for the whole thing.

Tx Jim · Feb 15, 2013

(quoted from post at 13:47:40 02/15/13) 1010 and 2010"s should all have a "Do not resuscitate" sign hanging on them...

Tim you're correct. JD should have recalled all of them but they didn't.

Cliff Nelson · Feb 15, 2013

Deere should have driven them out of the dubuque plant and right into the river. Would have saved a lot of headaches.

old · Feb 15, 2013

No they should have driven them right the the scrap guy so they could be recycled before they became head aches. At least doing it that way would not have polluted things and maybe they would have made good tractor for the people of China

green northern lights · Feb 15, 2013

Another option (if you ha"nt pulled sleeve plate out yet, or it is"nt cracked) is rebore. I did mine 12 or 15 yr. back, Got 40 or 45 (Can"t remember exact size) oversize aftermarket pistons, went togetter great , still running; really made a engine out of it...

2010 liner plate

fullthrotle

New User

old

Well-known Member

fullthrotle

New User

old

Well-known Member

MSD

Well-known Member

tim s

Well-known Member

Ray

Well-known Member

Tx Jim

Well-known Member

Cliff Nelson

Well-known Member

old

Well-known Member

green northern lights

Member

Similar threads