I need a shop to do block boring on a John Deere Mid A

I just recieved word from my machine shop that they could not bore my block due to the length. I have a set of .125 pistons and I need to find a shop in the Eastern NC or Eastern Va that has the capability to do the work. Email is open!
 
Ask around the big truck garages to see where they get their work done. I have a place in Akron Oh. center automotive that can bore them with the studs still in.
 
Call me sometime Wednesday if you"d like. Probably within 100 miles of you. I"m a little south of Raleigh. 919.605.60forty

Have done 7" + bores.

Ray
 
Call me sometime Wednesday if you"d like. Probably within 100 miles of you. I"m a little south of Raleigh. 919.605.60forty

Have done 7" + bores.

Ray
 
Call me sometime Wednesday if you"d like. Probably within 100 miles of you. I"m a little south of Raleigh. 919.605.60forty

Have done 7" + bores.

Ray
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top