|
| |
| John Deere Tractors Discussion Forum |
Topic: Re: 420 hydraulic remote not working.
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Tx Jim
02-07-2013 11:43:55
67.142.163.25
|
If the T-O-M doesn't work then it's no surprise that the remote valve doesn't work either. I think you need to get a gauge and check for pressure.
|
|
|
| Gamehunter56474
02-07-2013 16:24:46
216.165.151.2
|
|
Re: 420 hydraulic remote not working. in reply to Tx Jim, 02-07-2013 11:43:55
|
|
| I should have specified the TOM works great now
|
|
|
| buickanddeere
02-07-2013 19:54:56
216.183.155.234
|
|
Re: 420 hydraulic remote not working. in reply to Gamehunter56474, 02-07-2013 16:24:46
|
|
| The TOM is downstream of the scv . As long as the scv is in the middle/neutral position. The oil should flow unrestricted through the scv valve and to the TOM.
Having the wrong hose tips is a real possibility .
There is still the issue with the relief valve inside the scv body that is not opening to limit system pressure to approx 1040 to 1080psi.
Don"t be hissing around with the thing until the scv valve is properly built and calibrated.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
