Author	[Modern View]
Matt Griggs 01-29-2013 17:07:09 166.205.68.31 Report to Moderator	Thanks to the folks who replied in my previous thread. I tried those avenues but came up empty. I"m still looking for the return line that goes across the top of the injectors on a 5010. This tractor has the fat injectors, not the pencil injectors. Anybody else have any connections where I may find one? [Reply]   [No Email]
Retired Farmer 01-30-2013 19:09:24 207.200.116.66 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   Did you try Abilene Machine? They have a website. [Reply]  [No Email]
Matt Griggs 01-30-2013 18:49:13 166.205.68.19 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   Thanks for all the help guys. I think I found the right one in TX on tractor part.com. If that one isn't right, I'll try some of the later suggestions [Reply]  [No Email]
430wlpg 01-30-2013 18:03:17 166.181.3.240 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   I have a AR50732 return line NOS [Reply]  [No Email]
430WLPG 01-30-2013 10:54:34 64.250.200.62 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   I HAVE A NEW OLD STOCK RETURN LINE THAT MAY BE WHAT YOU NEED, IS IT A BANJO STYLE AT EACH INJECTOR WITH A BOLT THROUGH IT WITH A SEALING WASHER ON EACH SIDE? [Reply]  [No Email]
Mark-Ia 01-30-2013 06:05:24 207.177.117.7 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   I replaced a return line on a 4440 this fall and eliminated those rubber boots and line. John Deere has a kit for those fat injectors. [Reply]  [No Email]
leon 01-30-2013 04:58:46 173.30.193.163 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   I'd think that part should be pretty common for I'd further think that every JD porduct, green or yellow, that used the 6-531 engine would have the same return fuel line. [Reply]  [No Email]
tn 4320 01-30-2013 05:31:16 71.88.171.147 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to leon, 01-30-2013 04:58:46   the only return line that will fit his 5010, is made only for a 5010. they used the big injectors not the pencil injectors used in 5020 [Reply]  [No Email]
430 01-29-2013 17:18:00 66.87.114.254 Report to Moderator	Re: Still looking-injector return line for a 5010 in reply to Matt Griggs, 01-29-2013 17:07:09   Don't know what was suggested before. Did you try mcgrew tractor parts in new paris indiana. [Reply]  [No Email]