implement decal placement

I am restoring an RW disc and 44 plow and am going to have vinyl decals made for them, I'd like to put them in the correct location to preserve authenticity. the plow still has original John Deere lettering on the right rear beam, where does the 44 decal go? where on the disc should I place the John Deere decals? I can't find any pictures of an original RW disc.
 
Randys plow picture is correct, two decals.I have sales literature picture of your RW disk. Three john deere decals same as plow. One large 4-legged leapin deer-john deere-quality farm equipment decal,6x4,or so. Can mail copy of picture for placement. 9524665722
 
(quoted from post at 05:58:54 01/27/13) This may help.(if it works)
44 plow

I looked harder and found almost invisible remnants of the decal on the left frame.

(quoted from post at 22:19:12 01/27/13) Randys plow picture is correct, two decals.I have sales literature picture of your RW disk. Three john deere decals same as plow. One large 4-legged leapin deer-john deere-quality farm equipment decal,6x4,or so. Can mail copy of picture for placement. 9524665722

thanks, a picture won't be necessary, if you could tell me where on the frame they go that'd be great.
 
Two john deere decals; one each side of round pipe hitch just ahead of the front gangs. Rear frame across top of rear gangs, decals facing to rear, john deere decal cut in two, john; on left side on top frame; deere; on right side on top frame; Each decal is centered between the two bolts,left and right that mount the gangs. Leapin deere decal goes on top of large pipe that is between the rear gangs. Hope this all makes sense??
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top