Author	[Modern View]
farmeracb 01-26-2013 11:15:41 70.195.67.218 Report to Moderator	i am putting together the 6619 project, have ring kits from fp diesel. my manual doesnt indicate having two tapered upper rings, the rings are both tapered marked s1 fp up and s2 fp up and look the same, but dont want to assume 1 and 2 mean 1 top and 2 second without knowing. What ever happened to good instructions with things... Thanks, Adam [Reply]   [No Email]
Tim S 01-26-2013 12:35:21 75.49.13.105 Report to Moderator	Re: 619 piston rings order Tim S or ? in reply to farmeracb, 01-26-2013 11:15:41   Yes #1 would be considered the "top" ring, then #2 would be next down from the top toward the wrist pin,,the oil ring set then at the bottom, same as any other piston set up.Most any time there is a mark on a ring, like a "dot" or and "X" that mark would also go "up"..toward the top of the piston,,hope this helps.. [Reply]  [No Email]
farmeracb 01-26-2013 13:14:15 70.195.67.218 Report to Moderator	Re: 619 piston rings order Tim S or ? in reply to Tim S, 01-26-2013 12:35:21   Thanks, i know sounds like easy stuff but too much money invested for assuming anything. Thank You [Reply]  [No Email]
Tim S 01-26-2013 14:41:29 75.49.13.105 Report to Moderator	Re: 619 piston rings order Tim S or ? in reply to farmeracb, 01-26-2013 13:14:15   I'm with you there....Things like this is what I always felt this board was for, friends helping friends... [Reply]  [No Email]