Author	[Modern View]
Canadian Ken 01-06-2013 11:18:40 74.114.76.84 Report to Moderator	I was reassembling my clutch that has been apart 10 years - the friction discs have a break/split and I think I need new ones - Deere wants $181.54 each!!! I checked the PC658 parts bbok for unstyled D tractors - the part picture for D384R shows a crack at the 3 o'clock position - the picture looks just like my discs - Is the picture just a artists mistake or are the discs actually split from new?? As you can see from the pictures there is about a 3/8" split -where the pliers are pointing - but the discs fit perfectly in the pulley and the adjusting disc -it looks like the remains of staples or stitches where the split is. Any thoughts would be appreciated Thanks Ken [Reply]   [No Email]
Canadian Ken 01-07-2013 05:26:59 64.235.98.126 Report to Moderator	Re: 1928 D clutch friction discs?? in reply to Canadian Ken, 01-06-2013 11:18:40   Thanks Mark -I had forgotten to check his site -I got the gasket set from him for the tractor -every gasket so far on reassembly fits perfect. Ken [Reply]  [No Email]
Ken L 01-06-2013 12:26:01 98.125.104.227 Report to Moderator	Re: 1928 D clutch friction discs?? in reply to Canadian Ken, 01-06-2013 11:18:40   Bought a new set about 20 years ago for my 27 D. They were stapled together and looked just like yours. Checked them a couple years ago and the staples were pulled out of one of them. If they are thick enough so you can still adjust your clutch, run them. Shouldn't vause a problem [Reply]  [No Email]
Mark-Ia 01-06-2013 11:39:17 207.177.117.7 Report to Moderator	Re: 1928 D clutch friction discs?? in reply to Canadian Ken, 01-06-2013 11:18:40   www.farmpowerrestoration have new disks for $29.00 [Reply]  [No Email]