John Deere D torque specs

Lennard · Dec 23, 2012

Can someone give me the torque fot the headbolts and the valve clearance of a model D?

Greetings Lennard from the Netherlands

Mark-Ia · Dec 23, 2012

To adjust the tappets: Turn the flywheel until all tappet levers are free just before left-hand exhaust valve opens. Adjust the tappets by tightening the adjusting screws until their is no shake in the levers, then back off the adjusting screw 1/2 turn. Make sure the clamp is tight afterwards. I don't have the torque specs for the head. Someone else will chime in I'm sure.

greenmech · Dec 23, 2012

Service bulletin says 208 Ft pounds. .030 on the valve clearance Hot. Ron Mn.

John Deere D torque specs

Lennard

New User

Mark-Ia

Well-known Member

greenmech

Well-known Member

Similar threads