John Deere 435 rp upgrade

Anonymous-0 · Dec 21, 2012

I have a 435 that i"m planning to tear into for a winter project. im planning to take final drives apart and replace the axle seals which leak pretty badly. i figured while its that far apart i"d like to upgrade my 435"s ring and pinion to the stronger/slower one from the 1010, pre serial # 31000 i think. i am wondering if anyone has a part number for the parts? i can"t seem to find them online. I found some r&p for the 1010, but they didn"t seem to specify the serial # range. any help would be greatly appreciated!

buickanddeere · Dec 21, 2012

It's all on the JD web site.
There is the high speed 7/32 set AT16608 or the slow speed 6/32 set AT16609.
The bull gear final drives on 1010's after 31,001 are 15% slower than the earlier units.
Wish my 435 had the slow 6/32 R&P with the slower final drives.
2nd gear is way too fast for pulling and 1st is too slow.

Anonymous-0 · Dec 26, 2012

Thanks for the info. I found the link on deeres site for the 1010 parts manual, but my browser won't open it for some reason. I'm also liking the idea of changing the final drive gears while i'm in there too. just gotta decide how much i want to do

Anonymous-0 · Dec 26, 2012

if i may be a pita, would you happen to have the numbers handy for the final drive gears? thanks

buickanddeere · Dec 27, 2012

Keep us posted on the progress.

John Deere 435 rp upgrade

Anonymous-0

Well-known Member

buickanddeere

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

buickanddeere

Well-known Member

Similar threads