Author	[Modern View]
JohnDeereJimOhio 12-07-2012 14:47:44 24.140.54.235 Report to Moderator	I need to buy a John Deere G flywheel wrench.. Where is the best place to buy one? Also whats the normal cost of one? [Reply]   [No Email]
F-I-T 12-07-2012 19:41:21 184.6.247.3 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   A big, long, Harbor Freight 1/2" or 3/4" extension bent with a torch does the best job getting back behind there. Save it for later. [Reply]  [No Email]
rickdeere 12-07-2012 17:21:17 67.231.40.38 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   I have one I might sell email is open [Reply]  [No Email]
Ray 12-07-2012 17:13:46 74.5.145.85 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   Try ted klee in michigan.He messes with that stuff.Don't have his number,shouldn't be to hard to find.He advertises in the photo adds sometimes. [Reply]  [No Email]
Back Forty Bob. 12-07-2012 16:57:56 69.81.130.197 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   Get an impact swivel socket the proper size. With the right length extension and an impact you can get it "GUDUNTITE". [Reply]  [No Email]
Jim in Ma. 12-07-2012 16:26:49 72.70.112.169 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   I use a socket with a long extention here. [Reply]  [No Email]
JohnDeereJimOhio 12-07-2012 16:36:45 24.140.54.235 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to Jim in Ma., 12-07-2012 16:26:49   Do you have a long extension on a universal? [Reply]  [No Email]
Jim in Ma. 12-07-2012 18:49:56 72.70.112.169 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 16:36:45   I never tried that. I use an old breaker bar with a 1/2" square hole in the handle end as an extention it does bend a little but not as much as a universal. [Reply]  [No Email]
mbdeere 12-07-2012 15:40:59 184.63.147.142 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   Ebay [Reply]  [No Email]
Bob Harvey 12-07-2012 15:36:47 209.121.225.222 Report to Moderator	Re: Best Place to buy John Deere G flywheel Wrench in reply to JohnDeereJimOhio, 12-07-2012 14:47:44   Don't have an answer for either of your questions, but, won't a socket set work ? Just askin'. [Reply]  [No Email]