|
| |
| John Deere Tractors Discussion Forum |
Topic: Re: 3020 3pt hyd valve overhaul
[Show Entire Topic] [Return to Forum]
| Author |
[Modern View]
|
| Tx Jim
12-07-2012 05:10:27
67.142.163.27
|
OK since I now know it's a 3020 SN >123,000 I'll regroup. Check the big nut(parts key #15 or 24) for tightness as they have a history of loosening over time and affecting 3pt operation plus leaking oil. The following parts are for R&R of valve body if required to correct oil leak.
R40896 GASKET ADD 6.84 USD
2ea R27166 PACKING O RING ADD 1.22 USD 2.44 USD
This post was edited by Tx Jim at 05:15:24 12/07/12 2 times.
|
|
[Reply] [No Email] | |
| farmero2
12-07-2012 14:03:10
96.227.4.226
|
|
| Looks like I have parts 13 and 15 for the control lever. If 13 is brass colored then that is what I have. Parts 13 and 15 were frozen together so could not move the lever. I put heat to the big nut and got the lever moving. I quess now I should take it apart and see if I hurt the O rings. Otherwise it looks OK but the bottom gasket was no good. Thanks.
|
[Reply] [No Email] | |
[Show Entire Topic]
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
