3020 hyd pressure

LITTLE RED · Dec 2, 2012

TxJim how do I incress the hyd pressure on my pump with the loader hyd disconected off the rear svc Im only getting about 2000-2100 psi.
Thanks Doug

tim s · Dec 2, 2012

I'm not Jim,,but to increase the pressure you need to turn the stroke valve screw "in" it is located under the pump in front of the engine,,and if your are running the loader feed from a SCV,,you need to consider changing it to pull pressure from the elbow in front of the brake peddle and returning it to the trans oil filter bowl,, the change will impress you...

LITTLE RED · Dec 2, 2012

Thanks Tim S I have only had this 3020 2mo. dont know alot about these older ones I have many things to do to this tractor does ma deere have that filter cap with the adapter for a return line

Tx Jim · Dec 3, 2012

Tim answered your question but I'll provide a parts photo. Loosen jam nut(parts key #36) and turn screw(parts key #37) in until 2250-2350 psi is attained.

LITTLE RED · Dec 3, 2012

Thanks Tx Jim by the way I read the newspaper article sounds very familar to what we went through here when the big land developers tryied to overtake our farming township.

3020 hyd pressure

LITTLE RED

Member

tim s

Well-known Member

LITTLE RED

Member

Tx Jim

Well-known Member

LITTLE RED

Member

Similar threads