4720 wont start after roll-over

Are Johnsn

New User
Long story short, the tractor had a very slow roll over, we got it righted and now it won't start. There is oil in the pan and plenty diesel.

I tried priming the diesel filter to remove any air. The engine turns over but won't start. Any thoughts.... I don't see any other damage than a hazard light. The tractor was probably on its right side with the engine angled downward to upside down for about 2 hours...
 
I just tried the ignition and I didn't hear the load click. I have always heard that click whenever I start. Is that coming from the fuel relay, K-1?
 
I could be wrong but I think if some oil drained past the piston rings while tractor was over-turned then it's possible while attempting to start engine some push rods or valves could have gotten bent.
 
the loud click is the solinoid itself. no click means no fuel. the wires are on the right front corner of the engine. those solinoids can get filled with oil and then they wont pull in
Tim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top