Help: need 13x28 rim for Uncle's 2010

DennisT · Nov 23, 2012

Favorite uncle has a 1965 2010 with rusted out rear rim. I"ve seen no photo, but the description is that it is a one piece wheel; pressed steel center with factory welded-on rim, (??). It has a 14.9x28 tire on, "13x28," wheel. Nine lug- 7.5 inch center. Four slots at rim.

Can anyone help by suggesting where to find a wheel/rim? Thanks, Dennis (ex-JD Model D collector)

Tx Jim · Nov 23, 2012

I'd suggest checking with a tractor salvage yard.
JD3016 RIM 1 (13.6 X 28" TIRES AND 14.9 X 28" TIRES) (SUB FOR JD3010)

DennisT · Nov 23, 2012

Thanks for the correct part number. I wonder if
this is the only possible number or it or if JD
had numerous optional wheels that year and
model???

We are chasing salvage yards. So far the only
used one we found is out-of-state and over $200
plus shipping.

Side note is that I'm trying to help and the
tractor and my uncle are 300 miles from here.
Hence, no photo at this point. Tractor is in
Western Washington state.

This tractor also needs some help just inside the
PTO shaft. Shaft seems OK, but there must be a seized or bad bearing or a broken piece there too.

No end to these things.......

Dennis

Tx Jim · Nov 24, 2012

Did you see the part sub number JD3010 at the end of the parts description? You possibly could find a wheel from axle mount duals. The fact the wheel is "9" bolt is going to make it more scarce

DennisT · Nov 24, 2012

Thanks for the tip about rims from duals. Between
this problem, the PTO problem and the SynchroRange
transmissions in this model, they seem to be a head
ache. I will say he's never had trouble with the
transmission.

Dennis

Help: need 13x28 rim for Uncle's 2010

DennisT

Member

Tx Jim

Well-known Member

DennisT

Member

Tx Jim

Well-known Member

DennisT

Member

Similar threads